BRP Rubber Mounted SUB Mount DM-SUB Kit A for WR250F 06
Note: Uses M12 x 50 Hex Head Bolt
The BRP Rubber Mounted SUB "Scotts Under Bar" Adapter uses (8) Poly-Urethane bushings to isolate vibration and reduce rider fatigue by softening the harsh spike of hitting square edge rocks and obstacles. NOW available with two different durometer bushings to fine tune the amount of vibration dampening.
BRP RUBBER MOUNTED SUB KIT INCLUDES:
1) BRP Rubber Mounted SUB Adapter
1) Scotts Bolt on Tower (Frame Bracket)
2) Sets of Rubber Bushings - (Red = Medium and Blue = Soft.) & All Necessary Hardware.
This SUB mount assembly is designed for those of you who have a Scotts stabilizer and would like to go sub mounted. Kit includes Sub adapter and necessary hardware.
Designed to mount a Scotts stabilizer below the handlebar using your OEM triple clamp. The BRP Rubber Mounted SUB adapter mounts to the existing rear bar mount holes and allows you to run your bars in the same bar position as stock for 06 model. SUB Mounting a stabilizer offers several benefits over a conventional "above bar" setup and is becoming a very popular setup for GP's, motocross, off road, applications and riders of taller stature.
* Offers an approximately 1" taller bar position
* Lower Bend Bars can be used to compensate for additional height.
* SUB Mounting reduces the risk of bodily injury
* Stabilizer is tucked away and protected from potential damage from a crash.
BRP is an authorized Scotts Stabilizer Dealer and Service center with an extensive knowledge of stabilizer mounting applications. We have a complete line of stabilizer mounting applications and replacement parts. When it comes to service we offer complete service on all Scotts stabilizers.
Be sure to select the proper year, model and triple clamp in order to get the correct part for your order. When running a stabilizer in the sub mount configuration, the stabilizer link arm will need to be reverse mounted "going under the body of the unit". To reverse the link arm we recommend using a Scotts Link Arm Puller (Sold Separately). This unit cannot be used with cycra center reach mount handguards.