* Picture is only a representation. Actual product may vary

Kits Use A Special Tower

Note: Uses M12x55-11 Bolt

THIS SUB MOUNT IS ONLY USED ON BRP TRIPLE CLAMPS.

This SUB mount is available in two positions: 15mm or 21mm in front of steering stem.

BRP DM-SUB Kit's are for those of you who have a Scotts stabilizer and would like to step up to the SUB Mount system. Our DM-SUB kits come with SUB Mount and Bolt on tower and are priced as one of our package deals to save you money.

The BRP SUB "Scotts Under Bar" Mount is the latest in stabilizer mounting options and is a very popular setup for GP's, motocross, off road and riders of taller stature. The SUB Mount is designed to run 1-1/8" ProTaper style handlebar and mount a Scotts stabilizer below the handlebar replacing the bar mount assembly on your OEM or Scotts triple clamp. The SUB Mount setup offers several benefits over a conventional "above bar" stabilizer setup.

* Reduced risk of injury by coming into contact with stabilizer
* Approximately 1" taller bar position on most models
* Enables you to run a bar pad for 1 more level of protection

BRP SUB Mounts are designed exclusively to fit OEM or Scotts triple clamps. In some cases we may have one that will work on other aftermarket triple clamps.

BRP is an authorized Scotts Stabilizer Dealer and Service center with an extensive knowledge of stabilizer mounting applications. We have a complete line of stabilizer mounting applications and replacement parts. When it comes to service we offer complete service on all Scotts stabilizers.

SPECIAL NOTES:

When running a Scotts stabilizer in the SUB Mount configuration the arm will need to be reversed mounted. Using a lower bend bar can often emulate the stock bar height. Due to the SUB Mounts increased height, triple clamp style enduro handguard mounts will not work with many bar bends so we recommend running either U-clamp or Bonz mounts.