close
close
close
sidebar:

Galfer Brake Line (Front) for Dyna Street Bob FXDBI 06-07

No reviews Write a Review
$49.81
SKU:
01098385_FK003D549-1
  • security image 1
  • security image 2
  • security image 3
  • security image 4

Aftermarket stainless steel brake lines may look similar, but they are not the same! Every Galfer stainless steel line is made with only DuPont virgin grade PTFE inner core, 64 strand braid and our fittings are probably the most expensive, but highest quality you can find on the planet. These are the same fittings that Ferrari, Lamborghini, and Ducati uses, among a few other high end OEM’s. Our lines come with a lifetime warranty. Not because we make them at a low cost and can afford to easily ship out replacements, but because they are made extremely well. We also include all mounting components, extra washers, line end labeling, and bike specific installations, some with DVD’s. Depending on the application (ABS or non-ABS bikes), this line kit will seamlessly replace stock.  R&D and manufacturing is here in the US, along with our customer accessible tech support team. Line color available includes clear, black, blue, green, gold, red, platinum, orange, yellow, white and smoke. Pre-positioned Banjo fittings available in black, silver, gold, red and blue. Race team tested and proven!

Galfer Brake Lines use PTFE 62 Dupont-Teflon cores surrounded by 16 strands of steel braided cable (most other companies only use 12 strands in their brake lines). This results in an almost 0 expansion effect when there is application of pressure on the brake lever which equates to better, consistent feel and more confidence. Even after multiple hard stops, you won't have a soft brake lever feel due to brake line expansion. We've tested them ourselves on our track bikes personally and can vouch for their performance. Time and time again, we had effective and consistent braking throughout heavy braking zones.

Galfer Brake Lines give you more confidence while braking resulting in a safer, quicker motorcycle. For optimal braking, we recommend using Galfer Brake Pads with a high quality brake fluid in addition to upgraded Galfer brake lines. Once these are done, add a new brake master cylinder to really feel the magic!

Custom Protective Coating Colors
For protection against harash weather, scratches and the road debris, a clear colored protective coating is applied to all Galfer brake lines. This additional coating also protects your bodywork and parts of the motorcycle that come in contact with the brake line. Clear coating comes standard with all kits but its is possible (and we recommend it!) to have a custom line set made with a variety of color options to match your personally and your bike! 

Two Front Lines, Better Than Three
Many modern motorcycles (that don't have factory ABS) generally come with a 3 line setup. A single banjo line from the master clyinder and a y-spitter above the front fender that goes to each individual brake caliper. Galfer Stainless Steel brake lines offer a performance design that runs two lines from the master clyinder (usually a dual banjo bolt) to each brake caliper for better braking and increase feedback.  

Customized Banjos & Banjo Bolt Colors
Banjo bolts and washers are provided with all Galfer brake lines to make installation easier. No additional items are needed, with exception of a brake bleeder and brake fluid. We also offer the ability to select different color banjos and banjo bolts to further customize your brake lines.  Please note: The material used in the making of banjos and banjo bolts should be the same; steel and aluminum should not be mixed. Steel banjos should have steel bolts and aluminum banjos should have aluminum banjo bolts.

Black Crimp Coating
The area where the stainless steel line meets the banjo can be referred to as the crimp. On any standard brake line kit, this area is silver, regardless of the banjo or brake line coating color. At your request, a black chrimp coating can be added to turn this area black. This is great for those who want an entirely black set-up or those wanting another level of customization.

Specifically Made Applications
All brake line kits are specifically made for specific motorcycle and sporbike applications to ensure high quality fitment and long lasting performance. Installation instructions are provided for safety. Brake lines come pre-positioned for installation on your motorcycle for easy, no fuss installation.

This product hasn't received any reviews yet. Be the first to review this product!
? Have Questions? Ask an Experts
Galfer Brake Line (Front) for Dyna Street Bob FXDBI 06-07

Galfer Brake Line (Front) for Dyna Street Bob FXDBI 06-07

$49.81

Galfer Brake Line (Front) for Dyna Street Bob FXDBI 06-07

$49.81