BMW (2013-23) R1200GS/A R1250GS/A *Intermediate*
Height: 1/2" (13mm) TALLER than the stock GS seat, same height as the GSA
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Our proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Our unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
On this model, we built up the front of the seat, but dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!
The rear foam and cover kit is made from the same High-quality foam as the front seat and has a slightly wider and more dished out shape. Additionally, the front of the platform has been built up slightly to help keep the passenger from sliding into the rider.
Rear covers for OEM seat:
We offer a matching rear cover for your OEM rear seat. Just remove the old cover and install this cover for a matching set.
2015 R1200GS, R1200GSA
2016 R1200GS, R1200GSA
2017 R1200GS, R1200GSA
2018 R1200GS, R1200GSA
2019 R1200GS, R1200GSA
2019 R1250GS, R1250GSA
2020 R1250GS, R1250GSA
2021 R1250GS, R1250GSA
2022 R1250GS, R1250GSA
2023 R1250GS, R1250GSA
Available as a Foam and Cover Kit for the OEM pan or Complete Seat. The Foam & Cover Kit DOES NOT include the pan. The Complete Seat comes with an aftermarket pan with the foam and cover kit assembled, ready to ride. The rear seat comes as a Cover Only or Foam & Cover Kit. The rear seat DOES NOT come with a pan.
*FACTORY INSTALLED SEAT HEATER KITS WILL NOT WORK WITH OUR SEATS